Skip to content

DDW 1/10 RC M-Drift 1 RWD Chassis

3D model description


○ Website
○ YouTube
○ Facebook
○ Online Store

Support DarkDragonWing by bookmarking these links and start shopping:

Want to save time? We have these for sale:


Instructions | DDW 1/10 RC M-Drift 1 RWD Chassis
RC Modify 25 Part 2 | 180SX Rocket Bunny M-Drift 1 RWD 3D Printed
Modify 26 | DDW 1/10 M-Drift 1 RWD 1970 Dodge Challenger V8

DDW 1/10 M-Drift 1 RWD Chassis Specs:

  • Ride Height: 6-13mm Servo Suspension (Adjustable)
  • Turning Angle: ~50°
  • Front Kingpin Angle: 9°
  • Front Caster Angle: 9°
  • Width: 190-195mm on 3mm, 200 on 6mm, 205 on 9mm
  • Wheelbase: 257-262mm (Adjustable)
  • Front Shock: Leaned In 2.5°, Leaned Back 11°
  • Rear Shock: Leaned In 35°, Leaned Back 0°

Required Items:
1x eBay Amazon GS-9025MG Servo
10x eBay Amazon GearBest Zip Tie 95mm x 2mm
1x eBay Amazon Complete Drive & Diff
4x eBay Amazon Shock Absorber For 1/18 A949-55 55mm
2x eBay Front Axle
2x eBay 44MM Shaft 3Racing
8x eBay Ball Bearings 5x10x4mm MR105RS ABEC-5
4x eBay Amazon LM3UU 3x7x10mm Linear Ball Bearing
4x eBay Amazon 2x10mm Pin
4x eBay Amazon M4 Nut
16x eBay Amazon Ball Stud Head Screws
2x eBay Amazon 60mm x 3mm Shaft
14x eBay M1.6x5
14x eBay Amazon M3x4 Set Screw
6x eBay Amazon M3x8 Set Screw
4x eBay M3x16 Set Screw
4x eBay M3x20 Set Screw
4x eBay M3x6 Flat Countersunk
13x eBay M3x6 10.9 Alloy Steel Hex Socket
12x eBay M3x8 10.9 Alloy Steel Hex Socket
5x eBay M3x12 10.9 Alloy Steel Hex Socket
9x eBay M3x20 10.9 Alloy Steel Hex Socket
2x eBay M3x25 10.9 Alloy Steel Hex Socket
4x eBay M3x30 10.9 Alloy Steel Hex Socket
23x eBay M3 Black Nut
4x eBay Magnet 8x1.5
4x eBay Countersunk 8x3 Magnet
1x eBay Amazon 3.17mm To 5mm Change Over
2x eBay Amazon Frontal Dogbone Cup
1x eBay Dogbone 84mm
4x eBay Shim 8x5x1
4x eBay Amazon Aluminum 12mm Wheel Hex Hub Brake Disc
1x eBay Amazon Servo Signal Reverser
3x eBay Amazon 150mm Y Servo Wire
4x eBay Amazon GearBest SG90 Servo
1x eBay Amazon 3M Mounting Tape
1x eBay Grease
4x eBay Amazon 1/10 Drift Wheels

Transmitter & Reciever (pick one set):
1x eBay Amazon Transmitter + Reciever 3CH FS-GT3B
1x eBay Amazon Transmitter + Reciever 6CH FS-GT5

Motor, ESC, Battery:
1x eBay Amazon 55T 540 Motor + ESC (The lower the T value, the faster the motor.)
1x eBay Amazon 7.4V 2S 4000mAh Lipo Battery
1x eBay Amazon iMAX B6 Battery Balance Charger

Things that need to be done:
- The spring of "Shock Absorber For 1/18 A949-55 55mm" needs to be taken out, stretched out to about 100mm, and then assembled back in.
- The top mount of the front "Shock Absorber For 1/18 A949-55 55mm" needs to be cut off.

More 180SX Photos:
More 1970 Challenger Photos:

⚠️ Disclaimer: This section contains affiliate links to products. We may receive a commission for purchases made through these links.

3D printing settings

  • Software: Cura 3.6
  • Layer Height: 0.2mm
  • Infill Density: 75%
  • Materials: PLA, ABS
  • Wall Thickness: 4mm
  • Top/Bottom Thickness: Same as Wall Thickness
  • Filter Out Tiny Gaps: ☑ or ☐ as you see fit

Recommend printing this part with ABS:

  • 3D file format: STL



DarkDragonWing is an entertainment studio and a brand for hobby products. We are dedicated to making the hobby experience fun, educational, and affordable. We inspire many to explore, adapt, and evolve.



Add a comment