BAM! NAILED IT!
Creality, watch this... how it should be done!
The CR-10S a seriously good printer but whats NOT good on this printer is the sloppy Filament Run Out sensor mount and the cable management is a true mess. Specially the Z-Axe cables with are all just hanging loos in the air and causing stress onto the connectors with a serious risk of loosening and ruin a print.
So first I decided to drastically redesign the runout sensor mount but it turned out to be so good that I also came up with the thought to integrate the Z-Axe Cable Management and it worked out great!
I did NOT want to touch the integrity of my printer by using existing bolds or nuts so it must be clamped on somewhere. Also wanted to make use of the original micro switch.
And well after a long trail end error process, here it is!
Just a 2 hour print which will make your CR-10S much better, only to clip it on.
Have fun making and leave me a LIKE please!
UPDATE 24-6-2018 On request I made a optional runout sensor enclosure suitable for fixing a teflon tube.
UPDATE 6-7-2018: Yet another version.
By the way: Based on this concept I will design a sensor that can swivel a bit. Any wishes or a great idea? Let me know!
Just recently (One year ago) I discovered 3D printing and in addition 3D printing. I love tinkering my designs together in Fusion 360. Mostly inspired by things witch have some use. I'm always open for new ideas. If it's within my skills to make it, I'm happy to have a go with it.
Have fun making!