Skip to content

Accurate calibration/dimension test

3D model description

####There is an new version of this:

This test jig is designed to analyse the dimensional accuracy of a printer using engineering methods. But don't be afraid: an excel sheet is included which performs all the math. You just have to print, measure and type in the numbers. A caliper is needed.

Note that calibration is normally not needed for modern printers and calibration cubes are very coarse. Check:

Why this is more accurate than other calibration/testing methods:
- The edges have chamfers to eliminate effects from the first and last layers.
- Corners are rounded to minimize effects caused by sudden direction change.
- Different than a calibration cube the excel sheet does analyze the diffence in the length of the colums instead of their total lenght. This reduces the influence some effects wich would distort the calibration like a effective thicker wall due to z-wobble or over extrusion.
- It uses the total length availiable for typical calipers (155mm), reducing the influence of random efects
- By analyzing 5 values per axis instead of 1 the influence of random effects is reduced.

A derived recomendation for design tolerances is included based using a typical engineering approach (3sigma).

The excel sheet is protected against unintended changes but there is no password. So you can easily deativate the protection to edit the formulas if needed.

In order to get some statistical data: If you have performed this test if you could post the standard deviation for X and Y, the printer and slicer used in the comment section. Thanks in advance.

Update 1.5.2017: Small corrections in the STL file. Small version (145mm) added for smaller heatbeds

Update 4.5.2017: Z Axis added and now all distance differences are evaluated to get more data and a more accurate caluculation. Histogram added.

  • 3D file format: STL





Add a comment