Skip to content

Soccer Ball / Football Key Fob

3D model description

Soccer / Football fans will appreciate this key fob of a ball. It's a quick and easy print that uses very little filament. This is a good application for making a simple but effective two coloured print.

Pause the print at approx. 20% and 80% (without raft... as that adds extra print duration / height) to change filament colours. On a Replicator 2 use Z-Pause and change filament at 1mm and 4mm without Raft.

With a 1mm Raft change colours at approx. 42% (2mm) and 84% (5mm).

The ball part is 32.5mm in diameter and 5mm think at standard scale.

Refer to the instructions provided for recommended print settings (..to ensure you print it strong enough in the key ring area).

Looks good and makes a great little gift!

Note: If you like this check out all my other designs.

3D printing settings

Recommended print setting are:

Raft OFF (...as long as your printer does this okay)

Std / 0.20mm Resolution

3 Shells

50% or greater infill (to ensure it is sufficiently strong in the key ring area)

No support required

Pause the print at approx. 20% and 80% (without raft... as that adds extra print duration / height) to change filament colours. On a Replicator 2 use Z-Pause and change filament at 1mm and 4mm without Raft.

With a 1mm Raft change colours at approx. 42% (2mm) and 84% (5mm).

  • 3D model format: STL

Tags

Creator

License

CC BY

Related contents


Add a comment