Skip to content


3D model description

Spoon holder to keep your kitchen plan clean.


Anti sauce stains....

3D printing settings

Ideally, PET or PETG filament certified for food contact should be used. On the 3D Machines site, there are this type of filaments (brand ZORTRAX):

Nozzle diameter: from 0.2 to 0.6 mm (0.4 recommended, for faster printing, the parts are quite large)

Height of layer: 0.3 mm (recommended) or 0.2mm

Wall Thickness: 0.6 mm 0.8 mm or 1.2 mm (depending on nozzle diameter, ideally a wall with 2 print head passages for good resistance)

Fill rate: 25%.

Top and Bottom Thickness: 0.6 mm

Brim: YES (8mm for example)

Support: Yes, percentage between 15% and 20%.

  • 3D model format: STL





Page translated by automatic translation. See the original version.

Related contents