Skip to content

Flashforge Creator Pro improved Dome handle

Download free STL Flashforge Creator Pro improved Dome handle, zaptaDownload free STL Flashforge Creator Pro improved Dome handle, zaptaDownload free STL Flashforge Creator Pro improved Dome handle, zaptaDownload free STL Flashforge Creator Pro improved Dome handle, zapta

3D model description

This is a top handle for the Improved Dome for Flashforge Creator Pro. It makes it easy to remove and place the dome using one hand.

This thing was designed by customizing the parametric handle generator. If you use the stock dome or any other dome, you can customize it to your specific dimensions.

I attached it to the dome using 3M 2Lb (1Kg) double sides mounting tape.

A few design notes:
* The handle is attached to the dome near its front and rear walls for increase strength and stability.
* The two bases of the handle are extra wide for additional lateral stability.
* Make sure to attach the handle at the center of the dome for better stability.
* I printed it with PLA, 0.2mm 200C (higher temp = better layer adhesion), cooling fan on and material support. I also used brim to prevent the edges of the bases from lifting.

3D printing settings

Using the following options:

base_diameter = 30
handle_proportion = 2.7
filet = 5
base_proportion = 2.5
hole_depth = 15
handle_length = 125
base_rotation = 90
handle_bent_radius = 10
handle_height = 30
base_height = 3
base_offset = 0
$fn = 90
bent_fn = 30
hole_diameter = 1.5
handle_thickness = 7

  • 3D model format: STL

Tags

Creator


Add a comment