Skip to content

Modular bath dispenser design and customizable #DAGOMERLIN

3D model description

I designed this bath dispenser to avoid having multiple vials on the edge of the tub or in the shower stall. This prevents them from falling when they are almost empty. The advantage of these distributors is that they are flexible according to your needs since they have a groove and tongue to assemble at will. The mechanism is fully removable for easy cleaning and replacement of parts where necessary. Fully customizable, print color to choose, the color of the push button can differentiate the shower gel, shampoo .... The fixing of the tank to the wall is done by a plate, screw or silicone by injecting into the holes of the screw, it has an inner chamfer for the silicone to make holding pads. This deck has three pins to lock and unlock when you want. This mechanism needs a small stainless steel spring 20 Mm long and 5.5 Mm in diameter. This creation and compact, design and easy to use. #DAGOMERLIN link for the spring: http: // Ref = home & rt = home & rb = 1

3D printing settings

The body of the dispenser:
20% filling
layer with supports (to clean the burrs for the assembly)

The push button:
filling 50%
layer 0.2
without support

filling 20% ​​
layer 0.2
without bracket

Buttons to screw:
filling 60%
layer 0.2 without support

Support plate:
filling 50%
layer 0.2
with support

  • 3D model format: STL





Page translated by automatic translation. See the original version.

Related contents

Add a comment