A little raccoon that lives in a dumpster.
Press the pedal and the raccoon pushes the cover and comes out with his arms extended.
The design was made in Blender 2.8
License By ThomasKole & YouMagine
All files were designed to print in the size they come in, with a layer height of 0.2 mm from a 0.4 mm nozzle, but feel free to experiment!
-RIPB_Bin_Base.stl- -It's the main part of the pedal bin. It should be printed without support, but you may want to add some support where the pedal hole is.
-RIPB_Bin_Lid.stl- It is the cover of the pedal compartment, printable without support.
-RIPB_Bin_Pedal.stl- This is the pedal, intended to be printed laterally for a stronger click bit. It requires some support.
-RIPB_Bin_Raccoon.stl- This is the raccoon itself, designed to be printed on the back. Support is needed, but only for its back. Your head, arms and legs/feet should be printed without support.
Depending on the quality of the print, the bin_base may require some sanding on the inside so that the raccoon doesn't get stuck, this was not the case for me.
Page translated by automatic translation. See the original version.