Skip to content

9-blade underwater propeller - prop submarine

3D model description

9-blade underwater propeller

submarine prop 9 blades

diameter: 61mm approx.

3D printing settings

slicer: cura

support: no need, the 3D model is optimized to use no support

Filling: 100% to guarantee the resistance of the piece

Layer: 0.10 to 0.20 mm depending on your precision requirements

material: PLA

Board adhesion: no, the 3D model is optimized so that no additional adhesion is needed.

Not too fast at 30mm/s, to get a good layer connection. (It depends on the quality of your printer)

not too hot, because of the PLA 205*C drip nozzle

All models are tested and printed on a Dagoma DiscoEasy200 printer.

=============================================================================================

slicer: cura

support: no need, the 3D model is optimized not to use support

Filling: 100% to guarantee the resistance of the part

Layer: 0.10 to 0.20 mm depending on your need for precision

material: PLA

Tray adhesion: no, the 3D model is optimized so as not to need additional adhesion

Not too fast at 30mm / s, to get a good layer connection. (It depends on the quality of your printer)

not too hot, due to the PLA 205 * C drip nozzle

All the models offered are tested and printed on a Dagoma DiscoEasy200 printer

  • 3D file format: STL

Tags

Creator

Créateur de designs à mes heures perdues, je souhaite partager mes quelques créations...
A la demande je peux créer des modèles 3D d'hélice, sous divers fichiers et testé à l'impression 3D.
D'autres modèles d'hélices sont à venir, plus complexes que ceux déjà présentés.

Page translated by automatic translation. See the original version.

Related contents


Add a comment