Skip to content

Spinner fidget

3D model description

4X "608 Type" ball bearings needed

Here a link of the bearings we use, we recommend them because they are cheap (10,50 Euro / 16x):

To achieve the best spinning performance we recommend to remove the plastic dust shields (with a needle), deeply clean the ball bearings with solvent (e.g. Acetone) and let them dry in open air.

Note: print 2X "cap" models

Follow us on Instagram: nabu_3d

3D printing settings

Material: PLA
Layer height: 0.15 - 0.2 mm
Supports: not needed
Infill: 25-40%
Wall count (outer layers): min. 3

  • 3D file format: STL



Prototyping and custom parts.
Outdoor and sport accessories, gadgets, Arduino, PCB, 3D printing/scanning.
Follow us on Instagram: nabu_3d



Add a comment