Skip to content

Star Wars Vibro-Arbir Blade

3D model description

The Vibro-Arbir blades from one of the Preatorian guard in The Last Jedi.
Fits together to make a dual version!

All 3D printed with the exeption for some nails used as pegs for stability.
Strong enough to swing it around like and feel awesome.
Probably not strong enough to actually hit stuff and have it survive.

3D printing settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 2

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.1-0.2

Infill:

20%

Notes:
Most parts will print without any support and it is best that you print without support unless you don't mind getting the support out the nail holes.
Do not skimp out on the infill as the nail holes wont the needed support ( I would go with at least 18%).
Do no print too many walls on the blade parts to prevent the walls around the nail holes to be printed.

Guide / Tips

Everything is designed to be a rather tight fit so you may have to sand things down in order to fit them together.
The handle takes 4mm nails and the blade takes 3mm nails.
I put a bit of a chamfer on the holes but some times you still have to go in with a knife or file to fit the nails.

  • 3D model format: STL

Tags

Creator

License

CC BY SA


Add a comment