Skip to content

Soft Cream

3D model description

New July 6, 2018(soft_cream_103_corn.stl...)

This is a strap for mobile phones or key chain.

VR is here.
http://www.11moon.com/minne/SoftCream/SoftCream.html

3D printing settings

Printer:

m200 (hand made)

Rafts:

No

Supports:

Yes

Resolution:

width 0.32 mm, thickness 0.16 mm

Infill:

30%

Notes:
Print conditions

___common
Modeler: CINEMA 4D R19
Slicer: Simplify3D
Printer (hand made): m200
Firmware: Repetier

Jerk: 15
Acceleration: 1600mm/sec^2
Raft: none

___for PETG (cream)
Filament: 3DXTech LOW-GLOSS PETG
Nozzle: 0.3 mm HSS-CO (length 1.5 mm)
Print width: 0.32 mm
Layer height: 0.16 mm
Injection ratio: normal
Retraction length: 0.90 mm

Layers: top 5, bottom 4, side 3
Infill: 30 %
Skirt: 5 turns, 0.5 mm gap
Support: none

Temprature: 270 C

Print Speed: 1800 mm/min (80% at shell, infill, support)

Print time: 80 min

___for wood-PLA (corn)
Filament: FormFutura EasyWood
Nozzle: 0.40 mm HSS-CO (length 2.4 mm)
Print width: 0.44 mm
Layer height: 0.22 mm
Injection ratio: normal
Retraction length: 0.9 mm

Layers: top 5, bottom 4, side 3
Infill: 30 %
Skirt: 5 turns, 0.5 mm gap
Support: 20%, 75% for top and bottom 3 layers, 50 degree

Temprature: 185 C

Print Speed: 1500 mm/min (80% at shell, infill, support)

Print time: 60 min

  • 3D model format: STL

Tags

Creator

License

CC BY


Add a comment