Skip to content

Universal Spool Holder - Old Version

3D model description

2


THIS IS AN OLD VERSION OF MY UNIVERSAL SPOOL HOLDER


Here's a video explaining how this spool holder works...

https://www.youtube.com/watch?v=CmDmW-NRSjM&feature=youtu.be

3D printing settings

It's good to go... Every part prints in one print, it just takes a little alignment on the platform and a very leveled plate... This doesn't need more than 10% infill and can be printed well in 0.3mm...

I have various sized rods that are labeled in the thing files... What you should do is measure your spool and see what sized rods you need to print to make it fit...

Just choose 1 base arm, 1 spinner arm, and 3 equal length rods... Remember some spools have a small hole in the middle, and some have a big hole... If yours has a big hole, print a fat rod and two skinny rods, if yours has a small hole, print three skinny rods... I also have modified arms to fit the skinnier rods... be sure to check to make sure you downloaded the right files. When looking at the files, you'll see names like BottomRod_27in ... Here, and for all files that have a number and a number followed by "in"... like, 00in.... Put a "." in between... So BottomRod_27in is the bottom rod that is 2.7" long...

  • 3D model format: STL

Tags

Creator

License

CC BY SA

Related contents


Add a comment