Skip to content

PyBadge FeatherWing Snapfit Case

3D model description

Snap Fit Enclosure
This enclosure is designed to secure the PyBadge PCB without any hardware screws. The PCB rests on bottom half with built-in standoffs. The top half features cutouts for the buttons and display. The two halves snap fit together and clamp shut. Features on the edges of the snap allow the case to firmly stay shut but also allow it to re-open. Bottom half features a cutout for FeatherWings. Extra thick loops for clipping lanyards.

PyBadge
https://www.adafruit.com/product/4200

PyBadge LC
https://www.adafruit.com/product/3939

Mini oval speaker 8ohm 1w
https://adafru.it/4227

350mah 3.7v lipo battery
https://adafru.it/4237

Fully reversible microUSB cable
https://adafru.it/4111

  • 3D model format: STL

Tags

Creator

http://adafruit.com

Adafruit was founded in 2005 by MIT engineer, Limor "Ladyada" Fried. Her goal was to create the best place online for learning electronics and making the best designed products for makers of all ages and skill levels. Since then Adafruit has grown to over 25 employees in the heart of NYC. We've expanded our offerings to include tools, equipment and electronics that Limor personally selects, tests and approves before going in to the Adafruit store. We pride ourselves on having great prices, the best customer service, technical support and fast shipping. We hope we can assist you on your journey of learning - At Adafruit we celebrate engineering happiness!

License

CC BY


Add a comment