Skip to content

Rallye WRC coat rack

3D model description

Coat rack for WRC rally fans.

The set is composed of the 3 letters W, R, C, a coat rack piece to be printed 3 times, and a cover to be printed 5 times to hide the screws.

It is fixed with 5 countersunk head screws 3 to 4 mm in diameter. In my case, it is screwed on a painted wall bracket, itself fixed on the wall, but you can fix it directly to the wall.

For assembly, the coat racks are attached behind the letters by aligning the holes to allow the screws to pass through, which will hold the assembly. The letters W and R are also connected together by a screw.

Then I glued the covers to hide the screws.

It's been 3 months since I installed it, and in terms of strength, it hasn't moved at all.

3D printing settings

Printed on a Dagoma Discovery 200:

  • Resolution: 0.2mm

  • Flat printed letters with support and side coat racks without supports

  • Fiberlogy PLA Filament

  • About 1 hour by letter and 45min by coat rack

  • 3D model format: ZIP



Simple Designer sans prétentions qui souhaite juste partager ses créations.



Page translated by automatic translation. Suggest a better translation

Add a comment