This Ambient Lamp is inspired by the Lotus Flower.
It consist out of 10 parts (mainly to make it FDM printing ready).
The mid & bottom parts are printed in translucent Green PET-G and the center was printed in White PLA. The PLA is translucent enough :-) with the settings listed below.
Inside this example are 1 Red, 1 Green and 1 Blue LED. The bending of the light in the center part makes a Rainbow at the top of the Lamp. I tried to photograph it and succeeded a little bit. You can see it on one of the Pictures :-)
Also the overall color of the lamp can change by dimming the LEDs individually.
Of course the Light sources can be used as long as it fits :-) The hole for the Light source (in the center part) has a radius of around 32mm (inside is egg shaped).
Also included is a exploded view of the Lamp. This makes it easier to see how it all comes together.
If you have questions, feel free to ask :-)
Print support is necessary for the “center.stl”, “mid.stl” & the “bottom.stl” parts.
If you have a 0.4mm Nozzle: 0.2mm layer hight, 0.8mm top/bottom thickness, 0.8mm wall thickness & 20% infill.
The dimensions of this Lamp Assembled are 142,16mm x 146,257mm and 72.18mm high.
Do you like my work? Do you want to have something made? Contact me :-)