Skip to content

Marco's Wand

3D model description

A 3D printed replica of the shape that Star Butterfly's wand takes when is held by Marco during the third season of Star vs the forces of Evil.

Instructions:
Download the STL files and print them with the following settings

Blade.stl: 0.15mm layer height, 15% infill, No supports
Jewel.stl: 0.10mm layer hieght, 10% infill, No supports
FaceA.stl: 0.30mm layer height, 25% infill, Supports enabled
FaceB.stl: 0.30mm layer height, 25% infill, Supports enabled
Cover.stl: 0.30mm layer height, 25% infill, Supports enabled
Wing.stl (2 times): 0.30mm layer height, 20% infill, No supports
OrbA.stl: 0.30mm layer height, 25% infill, Supports enabled
OrbB.stl: 0.30mm layer height, 25% infill, Supports enabled
OrbPin.stl (2 times): 0.20mm layer height, 50% infill, No supports
UprCap.stl: 0.30mm layer height, 30% infill, No supports
Rod.stl (2 times): 0.30mm layer height, 50% infill, No supports
RodPin.stl (2 times): 0.20mm layer height, 50% infill, No supports
LwrCap.stl: 0.30mm layer height, 30% infill, Supports enabled
TipA.stl: 0.10mm layer height, 25% infill, No supports
TipB.stl: 0.10mm layer height, 25% infill, No supports
After all the pieces have been printed, assemble them following the diagram. I suggest to use superglue (cyanoacrylate) to hold them together. The parts can be painted easily using acrylic paint.

I made an Imgur album showing the assembly process! https://imgur.com/gallery/oi3hi

  • 3D model format: STL

Tags

Creator

Mechatronics engineer. My side-quest involves making my own videogame!

License

CC BY


Add a comment