Skip to content

Playmobil Swing and Slide

3D model description

Swing and slide for Playmobil child.

My son has a Playmobil playground with a slide and swing, but the problem is that he also has a little boy in a stroller and as he said: he's not allowed to go because he's too small, it's dangerous for him!

So we had to find a solution, and here is a little slide and a little swing for the little boy :)

The slide is composed of 3 parts to be printed flat, but be careful, I didn't manage to orient them correctly:

  • Right side: flat with pins at the top

  • left side: flat with pins at the top => be careful to turn the part over well

  • slide: with supports standing as in the photo => so you will have to turn it over

For assembly, simply insert the pins into the holes in the slide and use glue to hold it together.

For the swing, there are 7 pieces to assemble (see pictures of the exploded view).

  • Carrycot

  • Strings to print 2 times

  • Upper bars

  • Side Bars Left and Right

  • Soil

  • Print all parts flat

  • Use nacelle supports (be careful not to break the lugs for the clips)

  • For the floor, I made a hollow underneath to try to gain some material, but supports may be necessary

For the assembly, I tried to make a system of clips, but this one is to be improved, I advise you to use glue for the frame and the fixing on the ground.

For the frame, attention, there are 2 lugs at the back of the top bar which allow to orient the left and right side bars.

For the order of assembly:

  • pass the ropes through the pivots of the top bar and then hook the basket by clipping the holes on the lugs. According to your printing quality, a small resizing with a cutter will be necessary, but for my part, I had no breakage during the assembly (no need for glue either).

  • Connect the side bars to the top bar by orienting the pins at the back (with glue)

  • Assemble on the floor (with glue)

Feel free to comment if you had any printing or assembly problems, because this is the first time that I put a more complex model online.

For all these pieces, by increasing the scale, you can adapt them to larger characters.

3D printing settings

Print parameters:

  • Printed on a Dagoma Discovery 200

  • Filament PLA Chromatik

  • Resolution: 0.2mm

  • 3D model format: ZIP

Tags

Creator

Simple Designer sans prétentions qui souhaite juste partager ses créations.

License

CC BY

Page translated by automatic translation. Suggest a better translation


Add a comment